The BW series bottled water dispensing System is design for dispensing bottled water to coffee machines, beverage dispensers, vending machines and carts.
For remote locations where water supply is inaccessible
Kitchen/Refrigerator
Coffee Cart /Kiosk
Beverage Dispenser
Model :
BW1000AVoltage/Hz :
115V/ 60HZPressure :
40PSIFlow :
3.8LPM / 1GPMCustomized Service :
YES, Logo/User manual/ Unit boxLead Time :
15 DaysWarranty :
12 Months
Product Features
The BW1000 series bottled water dispesnging system is applicable for 5 gallon water bottle, It is the first generation dispensing system, working as ideal fresh water dispenser pump for refrigerator, ice maker, espresso machine and counter top faucet (this item is not including a faucet).
The automatic design dispensing system provides 40 PSI strong suction and 1 GPM (3.78LPM) high flow. Dry pumping protection: Automatic shut off when water drains, restart when bottle refilled. Muffle working.
The system with Runs dry without damage,extending the life of the pump; the long life motor ensures years of reliable operation.
The BW1000 Series water dispensing pump with 115V or 230V AC voltage; 50 or 60Hz;The standard UK, EU, US Plug will be providing according different market.
Products Photos:
Specification:
Model |
Flow Rate |
Max Pressure |
Voltages |
Cycle |
Amp Draw |
Type of Plug |
BW1000 |
1.0GPM/3.8LPM |
40 PSI/2..8 bar |
115VAC |
60Hz |
0.5A |
3.5ft (1M) cord+ US Plug |
BW2002 |
1.0GPM/3.8LPM |
40 PSI/2..8 bar |
230VAC |
50Hz |
0.25A |
3.5ft (1M) cord+ AU Plug |
BW2003 |
1.0GPM/3.8LPM |
40 PSI/2..8 bar |
230VAC |
50Hz |
0.25A |
3.5ft (1M) cord+ UK Plug |
BW2004 |
1.0GPM/3.8LPM |
40 PSI/2..8 bar |
230VAC |
50Hz |
0.25A |
3.5ft (1M) cord+ EU Plug |
Application & Installation
The BW1000 pump with quick disconnect ports allows for easy wand replacement in seconds. It can be widely Suitable for American refrigerators or other refrigerators with ice making function
The BW1000 also suitable for the Coffee cart/Mahcine, Coffee dispenser/ Beverage System, Drinking Water supply. It can be easy installed under the working table, With the automatic floating sensor, to detects the water in the bucket in real time. Control the water supply by faucet or switch of beverage machine.
Notice:
1,Please fill water in the pump manually after long time unused to restart the pump. Please check when the pump not working.
2,If you've received a new pump with water in, it's normally because of pumping test instead of stain of use. As we tested every product before sales.
Our Certificates
Frequently Asked Questions
Q1: Is the BW1000 water dispensing system easy to install?
A1: Yes, with quick disconnect ports allows for easy wand replacement in seconds
Q2: What is the quality warranty for this products?
A2: We provide 12M / 1 Year warranty, if you face the quality fault or defect, we will offer the free unit as compersation
Q3: Can I control the pump remotely?
A3: No at the monment; the device is control by switch on the products; or control by the water faucet/ beverage equipment;
Q4: What are the available working modes?
A4: It can be continue working or Intermittent working; deponds on the equipment usage.
Q5: How often does the pump need maintenance?
A5: Usually it is not need maintenance; but if the device do not use long time, please check if any air in the suction pipe; using one blow gun to clean the remain water/air inside of products.
Tags :